|
|
|
Can you restore data from your backup?
Many users don't test their backups. This is because they don't take the time or they don't know the steps to take.
This means that there is a risk that the restoration of their system will not work nor can they be sure that they are able to...
Computer SOS, Inc. - Release of Upgraded League Management Software Package
Buffalo, NY -- Computer SOS, Inc., a full service technology solutions firm, is pleased to announce the release of a newly upgraded League Management and Online Player Registration Software application. The most recent "Manage Your League" software...
Hard Drive Crash? The Essential Data Recovery Report
Your worst nightmare just became a horrifying reality. You keep hearing that little voice in your head mockingly shout “you should have backed that stuff up” The voice keeps echoing throughout your head as you perform a quick inventory all of...
How to get the case off your PC
This is the first step to servicing, upgrading or removing PC hardware from your PC. Refer to my other articles on adding, upgading or removing just about any piece of hardware. First things first, get that case off your PC. This is usually done by...
How to Tame Your Mouse
Reprintable Article: Permission is granted for the following article to forward, reprint, distribute, use for ezine, newsletter, website, offer as free bonus or part of a product for sale as long as no changes are made and the byline, copyright, and...
|
|
| |
|
|
|
|
Get Familiar With MSDOS.SYS
----------------------------------------------------------
Permission is granted for the below article to forward,
reprint, distribute, use for ezine, newsletter, website,
offer as free bonus or part of a product for sale as long
as no changes are made and the byline, copyright, and the
resource box below is included.
----------------------------------------------------------
Get Familiar With MSDOS.SYS
By Stephen Bucaro
Msdos.sys was one of the three files (along with io.sys
and command.com) that DOS 6 and earlier versions was
composed of. It was a binary file that created a disk
buffer and file control block for service routines, and
performed hardware initialization. Beginning with
Windows 95, msdos.sys was combined into io.sys and the new
msdos.sys became a text editable configuration file.
Msdos.sys is a hidden system file located in the root of
your boot drive. To view hidden files, in Explorer's
"View" menu select "Folder Options". In the "Folder
Options" dialog box click on the "View" tab and under
"Hidden Files" check "Show all files". You may want to
make a backup copy of msdos.sys named msdos.sys.bak before
you make any changes to the file.
There are three sections to msdos.sys. The [Paths] section
tells Windows where to find the necessary startup files.
The WinDir= entry contains the path to the folder
containing the operating system. The WinBootDir= entry
contains the path to the boot folder. The WinBootDrv=
entry contains the letter of the boot drive. You shouldn't
make any changes to this section.
The [Options] section is used to configure startup
settings. The last section of the file is filler to make
sure the file is at least 1,024 characters long. Before
you can edit the msdos.sys file you need to right-click on
the file name and in the "Properties" dialog box that
appears, uncheck the Read-only attributes check box.
The [Options] section can contain up to 16 entries. The
default msdos.sys usually contains only five entries. You
can edit these settings in Notepad for purposes of
debugging or just to make it start faster. Below is a list
of some useful entries.
AutoScan - Controls whether Windows runs ScanDisk after an
improper shutdown. If you have a large hard disk, ScanDisk
can take a long time. You may want to prevent it from
running automatically. Setting AutoScan=0 prevents
ScanDisk from running automatically.
BootGUI - Controls whether your system starts in Windows
mode or DOS 7 mode. Setting BootGUI=0 causes it to start
in DOS mode. (Note: Windows Me does not support booting in
DOS mode, so this will have no effect.)
BootKeys - Controls whether Windows
will recognize keys
pressed during startup. You might want to press F8 or Ctrl
during startup to display the Startup Menu. However, if
you want to keep unauthorized people from bypassing your
logon, you should set BootKeys=0 to ignore keys presses
during startup.
BootMenu - If you want the Startup Menu to appear each
time that you start Windows, set BootMenu=1.
BootMenuDefault - Specifies the Startup Menu command that
is highlighted and selected by default when the Startup
Menu appears. Set this to one of the menu numbers shown
below.
1=Normal
2=Logged
3=Safe Mode
4=Step-by-step
5=Command prompt only
6=Safe Mode command prompt only
BootMenuDelay - Sets the delay in seconds that the Startup
Menu is displayed before the default option is
automatically executed.
BootMulti - If you had DOS on your computer when Windows
was installed, BootMulti=1 puts the option to boot from
this previous version of DOS in the Startup Menu.
(Windows Me does not support booting in DOS mode.)
BootSafe - For the thousands of Windows users whose system
stopped working properly years ago, set BootSafe=1 to
start in Safe Mode automatically.
BootWarn - Again, for the thousands of Windows users whose
system stopped working properly years ago. Set BootWarn=0
to start normally even if the previous boot failed. But
because you haven't fixed what's preventing Windows from
starting properly in the first place, this may cause your
system to freeze up with the "blue screen of death".
BootWin - If you had DOS on your computer when Windows was
installed, setting BootWin=0 causes your system to boot to
previous version of DOS rather than Windows. (Not
Windows Me).
Logo - Setting Logo=0 will prevent the Windows logo from
being displayed during startup. This is useful if you
want to see system messages rather than Microsoft's logo
during startup.
There are several other msdos.sys [Option] settings that
are of limited usefulness. Also, don't be surprised if any
of these options don't work the way Microsoft claims they
do in the Windows Resource Kit. But you can try using
these settings to change the way Window starts for
purposes of debugging or to make it start faster.
----------------------------------------------------------
Resource Box:
Copyright(C)2002 Bucaro TecHelp. To learn how to maintain
your computer and use it more effectively to design a Web
site and make money on the Web visit
http://bucarotechelp.com
To subscribe to Bucaro TecHelp Newsletter Send a blank
email to bucarotechelp-subscribe@topica.com
----------------------------------------------------------
About the Author
None
|
|
|
|
|
|